3 ] Installing The Main Pcb - Brother PT-MT (P-touch mini ' tech Service Manual

[ 3 ] Installing the Main PCB
(1) Secure the main PCB to the body cover with two screws.
(2) Route the LCD flat cable through the cable guides while pressing them outwards.
(3) Set the LCD into place while pressing the arms outwards.
Figure 3.2-5 Reinstalling the Main PCB
(4) Snap each of the plus and minus terminal ASSYs into the bottom cover.
Figure 3.2-6 Setting the Plus and Minus Terminal ASSYs
III - 13