Remote Control - lifeSMART LS-1000X-4M Owner's Manual

PREPARATION
Place the heater on a firm, level surface and plug into a grounded 120V 60Hz power outlet, and turn on
the power switch in the rear of the unit.
Only operate heater in upright position with caster wheels attached.
Insert 2 AAA batteries into the remote control before using (Batteries Sold Separately).
Rear of
Remote
Push and Slide Cover

Remote Control

ON/OFF button: Used to power the digital display on or off
Temp up button: To increase set temperature
Temp down button: To decrease set temperature
Mode button: Used to select between the available heat modes
_/_button : Button for alternating between Fahrenheit and Celsius.
Timer button: Used for setting timer and adjusting hour increments of the timer
Install Batteries
11
Reinstall Cover