Connect The Freecom Mediaplayer To The Pc; Format Built-In Hdd Via Usb - Freecom 450 User Manual

1. Connect the Freecom MediaPlayer to the PC

1. Connect the USB cable to the Freecom MediaPlayer and connect the power adapter
to the DC jack on the Freecom MediaPlayer.
2. Connect the adapter into an AC outlet.
3. Connect the Freecom MediaPlayer to the PC's USB port.
4. Switch the power on by pressing the power on-off button on the Freecom Media-
Player.
5. Windows 2000, Windows XP and Windows Vista will recognize the Freecom Me-
diaPlayer as a USB drive; you can use the Freecom MediaPlayer without installing a
driver. If the Freecom MediaPlayer is not recognized or detected, please check that
the USB connector is properly connected to the device and the PC.

1. Format Built-in HDD via USB

File System features
Please refer to the tables below for an overview:
File systems supported by different operating systems
Operating system
Windows 98SE
Windows ME
Windows 2000
Windows XP / Vista
4. Put the 4 screws back.
File system
FAT
yes
yes
yes
yes
Use as External USB HDD
FAT32 NTFS
yes not supported
yes not supported
yes yes
yes yes
EN
1
1