Connecting - Canon PowerShot SD430 Software & Wireless Manual

Connecting

Connect to the computer using the camera controls.
You will not require an interface cable because you are connecting wirelessly.
Connect after you have registered the target device (computer) according to the procedures in
Registering the Target Device with the Camera (p. 78).
• The wireless networking function can be operated up to approximately 30
meters away with a direct line of sight to the target device. However, this
distance will depend upon the operating conditions.
• You cannot have more than one camera connected at a time.
1
Turn on the camera and set it to the playback
or shooting modes.
Playback Mode
After connecting, you can download camera
images to the computer and print them on a
printer.
Shooting Modes
After connecting, you can transmit a recorded
image immediately to the computer.
See Actions Possible with the Camera Connected to a Computer (p. 89) for details.
• The movie mode cannot be used over a wireless connection.
• You can switch between the playback and shooting modes over the
wireless connection.
2
Press the button.
A menu for selecting the target device will appear
in the LCD monitor.
The button will light blue.
Alternatively, you can display the menu for selecting the target device by
pressing the MENU button, selecting the [
by the [Connect/Disconnect] option, and pressing the FUNC./SET button.
Power Button
FUNC./SET
Button
MENU
Button
(Wireless)] menu followed
85
Playback
Mode or
Shooting
Modes
Button