Connecting The Camcorder To A Computer - Canon Optura 30 - Optura 30 MiniDV Camcorder Instruction Manual

Digital video software (windows) ver.12 instruction manual
Hide thumbs Also See for Optura 30 - Optura 30 MiniDV Camcorder:
Table of Contents

Advertisement

Connecting the Camcorder to a Computer

❍ Make sure the camcorder is being powered using the power adapter
before connecting it to a computer.
❍ Be sure to install the Digital Video Software before you connect the
camcorder to the computer.
❍ Connect the USB cable directly to one of the computer's main USB
ports. The interface may not function correctly if the camcorder is
connected via a USB hub.
❍ The connection may not operate correctly if you are using other USB
devices, excluding USB mice or keyboards, at the same time. If this
occurs, disconnect the other devices from the computer and try
reconnecting the camcorder.
❍ Do not connect two or more camcorders to the computer. The
camcorders may not operate normally.
❍ Never allow the computer to go into standby (sleep) mode while a
camcorder is connected via the USB interface.
❍ Refer to your computer manual for the location of the computer's USB
ports.
❍ See your camcorder instruction manual for connecting instructions.
1.
Insert a memory card containing images into the camcorder.
2.
Connect the power adapter to the camcorder.
3.
Turn the POWER switch to PLAY (VCR) and move the TAPE/
CARD switch to CARD.
Wait until the card access indicator stops flashing.
4.
Attach the supplied USB cable to the computer's USB port
and the camcorder's USB Terminal.
• The first time you connect the camcorder to the computer:
- Installation of the DV TWAIN Driver (Windows 98/Windows 2000) or
the DV WIA Driver (Windows Me) starts.
- If the "Digital signature not found" message appears, click [Yes].
- After a few moments, a message such as "New Hardware Found"
appears and the driver will be installed automatically.
- If you are prompted to restart the computer, restart the computer.
• Windows 98/Windows 2000/Windows XP: A window appears allowing
you to select an application program to start.
Windows Me: The Scanners and Cameras Wizard starts. Click [Cancel] to
close the Wizard.
E
17

Advertisement

Table of Contents
loading

Table of Contents