Canon PowerShot SD430 Software & Wireless Manual page 86

82
Wireless Network Settings for the Computer and Camera
12
After confirming the displayed settings, click
[Print] to print out the configuration
contents.
This information will be necessary if you cannot
make a connection or later change the settings.
Store this information in a secure place because it
is important information about your computer.
13
After the printing finishes, click [Next].
14
Click [Finish].
15
When [Registration completed] appears on
the LCD monitor, press the F F UNC./SET button.
This registers the network configuration on the
camera.
16
Press the camera's MENU.
The camera will return to the playback mode.
17
Turn off the camera.
The Camera Control Window on the computer screen will close.
18
Detach the interface cable and connect wirelessly.
Please use the procedures in Connecting to test the correction operation of the wireless
connection (p. 85).