Powershot S1 Is - Canon PowerShot S60 Software Starter Manual

96

PowerShot S1 IS

PowerShot S1 IS
How to Connect the Camera to a Computer and Prepare to Transfer Data
1
Attach the supplied interface cable to the computer's USB port and the camera's
DIGITAL terminal as shown below.
The camera and computer will automatically set themselves to the correct mode for
communicating when they are connected.
CD-ROMs in the Package
•Canon Digital Camera Solution Disk
•ArcSoft Camera Suite 2.1
See ArcSoft Camera Suite 2.1 CD-ROM (p. 75) for information about the features and
installation procedures for the programs on the disk.
Non-Supported Programs and Features
Does not support with the Direct Transfer function.
The camera does not record RAW images.
USB Port
1. Slip a fingernail in the terminal
Interface Cable
2. Orient the connector with the
To the DIGITAL
Terminal
cover's slot to open it.
symbol up and insert it all the way.