Powershot Pro 1 - Canon PowerShot S60 Software Starter Manual

94

PowerShot Pro 1

PowerShot Pro 1
How to Connect the Camera to a Computer and Prepare to Transfer Data
1
Attach the supplied interface cable to the computer's USB port and the camera's
DIGITAL terminal as shown below.
The camera and computer will automatically set themselves to the correct mode for
communicating when they are connected.
CD-ROMs in the Package
•Canon Digital Camera Solution Disk
•ArcSoft Camera Suite 2.1
See ArcSoft Camera Suite 2.1 CD-ROM (p. 75) for information about the features and
installation procedures for the programs on the disk.
Non-Supported Programs and Features
Does not support with the Direct Transfer function.
Images Recorded in the Adobe RGB Color Space
* The images will appear desaturated when displayed in ZoomBrowser EX/ImageBrowser.
* The image printouts will appear desaturated when printed from PhotoRecord/
ImageBrowser.
Warning about Operating the Camera Shutter from the Computer (Remote
Shooting)
In macro mode, it may be difficult to focus when the zoom is set to the
maximum telephoto setting. Set the zoom to maximum wide angle to record.
USB Port
1. Open the terminal cover with your
Interface Cable
2. Hold the USB connector so the
To the DIGITAL
Terminal
fingernail.
side is up, then insert it into the
DIGITAL terminal securely.