Table of Contents
Advertisement
Ins
Ins
Technical Specifications
Model
Gross capacity (l)
Net capacity (l)
Width (mm)
Height (mm)
Depth (mm)
Energy consumption
(kWh/day)
(kWh/year)
Energy class, according to EU Standards
Rated power (W)
Weight (kg)
Installing the appliance
Transportation, unpacking
The appliance and the interior fitting are protected for
transport.
Remove all packaging and any adhesive tape.
Any remnants of adhesive can be removed using
white spirit.
After transportation the appliance must not be
switched on for 2 hours. This is to allow the
refrigerant to settle.
Cleaning
Clean the accessories and the inside of the appliance
with warm water and bicarbonate of soda (5 ml
to 0.5 litres of water). Rinse and dry thoroughly.
Do not use detergents, abrasive powders, highly
perfumed cleaning products, wax polishes or
cleaning products containing bleach or alcohol.
tr
uctions f
tr
uctions f
ERT 1646
Fresh food com.: 159
Fresh food com.: 148
or the Ins
or the Ins
550
850
600
0,41
150
A
90
37
Location
The appliance should be positioned in a well
ventilated, dry room.
Energy use is affected by the ambient temperature.
The appliance should therefore:
not be installed next to radiators, cookers or
other sources of heat
only be installed at a location where the ambient
temperature corresponds to the climate
classification, for which the appliance is
designed.
The climate classification can be found on the
serial plate.
The following table shows which ambient
temperature
classification:
Climate Classification Ambient Temperature
t
aller
t
aller
is
correct
for
SN
+10 to +32 °C
N
+16 to +32 °C
ST
+18 to +38 °C
each
climate
11
Advertisement
Table of Contents
