Description Of Components; Controls Description - Espressione Cafe Roma De Luxe Instructions Manual

Table of Contents

Advertisement

DESCRIPTION OF COMPONENTS

A - Machine body
B - Lock button of the coffee grinding regulator
C - Tank cover
D - Coffee beans tank, grinding regulator
E - Boiler temperature gauge (°C and °F)
F - Water/steam lever
G - Accessories box
H - Water tank (capacity 1,5 lt MAX level)
I - Tank filler flap
L - Control panel
M - Continuous flow device of ground coffee
N - Dispenser with ground coffee measure
O - MAXI-CAPPUCCINO attachment and stylus for water and steam supply
P - Press
Q - Water collection tray
R - Coffee powder collection tray
S - Cup grille
T - Professional filter holder
U - Thermocream® Filter
V - Silicon Ring
W - Thermocream® Disc

CONTROLS DESCRIPTION

1 On/off light
2 Coffee temperature light
3 Steam temperature light
4 Dispenser filler light
5 On/off button
6 Coffee brewing button
7 Steam button
8 Dispenser filler device button
- Remove the water tank (H) from the opening on the machine, fill with fresh natural water up to the Max mark
(1.5 lt.), and refit it into its housing onto the body. In order to guarantee the correct operation of the appliance,
push the tank down as far as it will go, Fig. 5. The tank may also be filled from the top, by pouring water through
the opening and after lifting the filler cap (I), Fig. 4.
- Plug the appliance into the mains.
- Press the main switch (5) Fig. 2; the power light (1) will light up and light (2) will start blinking until the operat-
ing temperature has been reached. Lower the water/steam lever (Fig. 3 - F), and, at the same time, press the
coffee brewing button (6) thus bleeding any air or water out of the circuit. Fill up at least a cupful of water.
Lift the water/steam lever (F) back up and stop the brewing cycle by pressing the coffee button (6).
IMPORTANT!: it is recommended that this operation be carried out every time the machine is started after a
few days it has not been used.
For the daily refilling of the water tank, lift the filler flap (I) and pour in fresh natural water through the opening
(Fig. 4).
- Introduce the coffee into the coffee beans tank (D) Max 230 gr. Fig. 6. Coffee may be ground coarse or fine,
as per your personal preferences. To change the grinding level, press the stop button (B) and turn the coffee
grinder clock or anticlockwise, following the graded scale, Fig. 7. THIS OPERATION MUST ONLY BE PER-
FORMED WITH THE GRINDER OFF.
SET UP

EN

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents