Blackberry RIM 857 Wireless Handheld Installation & User Manual page 155

Customizing your handheld's options — Handheld options
Vibrate, Vibrate+Tone, or None. The default notification setting is
Vibrate+Tone.
Out of Holster: Customize the way that the handheld notifies you
of a new message when it is out of the holster. Choose from: Tone,
Vibrate, Vibrate+Tone, or None. The default notification setting is
Tone.
Tune: Select the tune you wish to hear when you are notified of a
new message. You can hear each tune by scrolling through the
options. The default is Tune 1.
Volume: Select the volume for your notification tune. Choose from
Low, Medium, High, Escalating, or Off. If you set your notification
type to vibrate and set the Volume field to Low, the handheld will
vibrate only once when a new message arrives. If you set this field
to Medium, High, or Escalating, the handheld will vibrate twice
when a new message arrives. The default is Low.
Note The Escalating option provides you with quiet notification
progressing to louder notification.
Number of Beeps: Select the number of beeps the handheld should
make before notification stops. Choose from 1 to 5 beeps. The
default is 1.
Repeat Notification: Set whether or not you want to be reminded of
unread messages waiting. Choose from:
• Low - the LED will flash and the handheld will tone or
vibrate once every 15 minutes for 30 minutes
• Medium - the LED will flash and the handheld will tone or
vibrate once every 10 minutes for an hour
• High - the LED will flash and the handheld will tone or
vibrate once every 5 minutes for 2 hours
Installation and User's Guide
155