Canon SD10 - Powershot 4MP Digital Camera Software Starter Manual page 68

62
Starting ImageBrowser
How to Set ImageBrowser to Start Automatically with Mac
OS X
You can have ImageBrowser start automatically when you connect the
camera to the computer by adjusting the following settings.
Mac OS X v10.2
1. Start Image Capture, click the [Image Capture] menu and select
[Preferences].
2. In the next menu, click the [Camera Preferences] list box and select
[Other].
3. Select [ImageBrowser] in the program selection window.
4. Close Image Capture.
ImageBrowser will start automatically from the next connection onward.
Mac OS X v10.1
1. Start Image Capture and select [Other] from the Hot Plug Action list
box.
2. Select [ImageBrowser] in the program selection window.
3. Close Image Capture.
ImageBrowser will start automatically from the next connection onward.
Mac OS 9
1
Attach the supplied USB cable to the computer's USB port and the
camera's Digital Terminal. Prepare the camera for communication
with the computer.
Procedures for attaching the camera to the computer and
placing it in the correct mode for connecting vary between
camera models. See Information about Your Camera (p. 105)
for details.