Powershot Sd10 Digital Elph/Digital Ixus I - Canon SD10 - Powershot 4MP Digital Camera Software Starter Manual
Software starter guide dc sd ver.14
Hide thumbs
Also See for SD10 - Powershot 4MP Digital Camera:
- Manual (2 pages) ,
- Quick start manual (2 pages) ,
- User manual (171 pages)
Table of Contents
Advertisement
108
PowerShot SD10 DIGITAL ELPH/DIGITAL IXUS i
PowerShot SD10 DIGITAL ELPH/DIGITAL
IXUS i
How to Connect the Camera to a Computer and Prepare to Transfer Data
1
Attach the supplied USB cable to the computer's USB port and the
camera's Digital terminal as shown below.
2
Set the mode switch to the playback mode and turn the camera's
power on. This will prepare the camera to exchange data with the
computer.
CD-ROMs in the Package
•Canon Digital Camera Solution Disk
•ArcSoft Camera Suite 1.2
See ArcSoft Camera Suite 1.2 CD-ROM (p. 88) for information about the
features and installation procedures for the programs on the disk.
Non-Supported Programs and Features
The camera shutter cannot be controlled from a computer.
USB Port
1. Open the terminal cover by slipping
USB Cable
2. Insert it all the way until it clicks.
To the Digital
Terminal
a fingernail under its left edge.
Advertisement
Table of Contents
