Parts Information; Operator Panel; Operator Button; Indicator Lights - Rimage PrismPlus! User Manual

Rimage PrismPlus! User Guide

Parts Information

Operator Panel

The operator panel is located on the front
of the printer. There are four indicator
lights and an operator button on the
operator panel.

Operator Button

Press the operator button to open and close
the printer tray. The Error indicator light is
in the center of the operator button. Refer to
the

Indicator Lights

section below for more
information.
Indicator Lights
The name and function of each indicator light is described below. Each indicator light reflects different conditions on the
Standalone Prism printer. Prism printers that are mounted on autoloaders or AutoPrism AutoPrinters have different conditions.
Refer to your autoloader or AutoPrinter user guide for more information about these conditions.
Image Name Functionality
•
Error
indicator
light
•
•
•
Disc Not
Present
indicator
•
light
•
•
•
•
•
Active
indicator
•
light
•
Power
indicator
•
light
•
•
12
Operator Button with
Error Indicator Light
Disc Not Present
Indicator Light
Active Indicator Light
Power Indicator Light
The yellow Error indicator light on the operator button illuminates when an error occurs during
printing.
The Error indicator light and the Disc Not Present indicator light flash when the printer is in
cleaning mode.
The Error indicator light illuminates and the Disc Not Present indicator light flashes at a slow
rate when the ribbon is out.
The yellow Disc Not Present indicator light flashes a fault code when an error occurs. After the
error is resolved, press the operator button to turn off the indicator light.
The Disc Not Present indicator light illuminates when the tray is empty or when the disc is not
properly clamped. When a disc is placed on the tray, the Disc Not Present indicator light turns
off.
In Multiply Copy mode, the Disc Not Present indicator light illuminates until the disc is removed
from the pad.
The Disc Not Present indicator light flashes continuously at slow rate when the ribbon is low
(less than 100 prints remain). This applies only to monocolor ribbons and only if you have not
changed or switched ribbons since loading the current ribbon.
The Disc Not Present indicator light flashes at a slow rate and the Error indicator light
illuminates when the ribbon is out.
The Disc Not Present indicator light and the Error indicator light flash when the printer is in
cleaning mode.
The yellow Active indicator light flashes when the printer is operating.
The Active indicator light flashes continuously at a slow rate when the printer is in AutoPrinter
mode.
The green Power indicator light illuminates when the printer is powered on.
The Power indicator light flashes when the system board requires reprogramming.
The Power indicator light turns off when the printer detects a bad pixel element in the print
head. The Power indicator light turns back on when a disc is placed on the tray and you can
continue to print discs. If you continue to print, small lines may occur in your print jobs. This is
an indication that the print head may require replacement.
The Power indicator light turns off when the printer is powered off.
Operator Panel
110635_K