Advertisement
Small = 12 CPI, .09375"H
Large = 8 CPI, .125"H
Formats
Strip - used when printing on Brady Strip series labels such that contain two or more butt cut pieces. Your text
will show only once on the screen but will be duplicate the text to the number of strips indicated when printing.
Center - automatically centers the text vertically to the total number of lines entered.
Wire/Repeat - repeats the text entered for the entire length of the label.
Keyboard
Clear - clears all characters from the screen .
Delete - deletes the character at the cursor position
Feed - advances the labels .
Shift - (3 shift keys; 1 is a keyboard key and 2 are in the hand grips
Print - prints the text displayed on the screen.
Enter - activates the size code at boot-up and acts as a return key to go to the next line .
Arrow Keys - move the cursor in the direction indicated on the key.
Serial - highlights the character to be serialized .
Functions
Feed alignme nt offset for small markers and labels
A new feed alignment (vertical registration) adjustment has been added. To obtain more accurate print registration
on 1-line labels and markers, the alignment can be changed plus or minus 3 dot lines:
1. Press Shift-1 key combination while in label text edit mode.
2. Press Up or Down arrow keys to change from -3 dot lines up to +3 dot lines.
3. Press Enter key. The printer will feed the next marker to complete registration.
4. Print label/marker.
5. If alignment is not acceptable, repeat steps 1 to 4.
Bold Print
Page 4
Advertisement
