Brady BMP71 Tutorial page 23

22
Lesson 8. Add Areas
Print Preview and Print
1.
To move through the print preview:
2.
To print the label, from Print Preview:
3.
Your label should look like this:
Clear Area
1.
2.
3.
4.
5.
6.
Notice the data is cleared from the area, but the area remains. (Check the status bar. You
should still have three areas.)
BMP71 Tutorial
Press Print Preview
Press left/right navigation keys.
Press Print .
Press Area
Choose Goto.
Enter: 3
Press Enter or OK
Press Clear/Esc
Choose Clear Area Data, then press Enter
.
.
.
.
or OK .