ME30S just as familiar. Setting curves is as easy as it is on all on the rear of the unit. Polarity convention is per IEC/ANSI/ Rane graphics thanks to our innovative constant-Q circuitry. If AES standards of pin 2 positive, pin 3 negative and pin 1 shield.
Page 2
Front Panel Description MASTER CONTROL 31.5 1.25k 1.6k 2.5k 3.15k 6.3k 12.5k • • ±12 ME30S • • MICROGRAPHIC • • EQUALIZER ±6 • • LEVEL BYPASS RANGE POWER 1 LEVEL control: Sets the level of signal coming into the ME30S. Turn this control down if the OverLoad LED lights up steadily (meaning too strong an Input signal).
Page 3
1 XLR INPUT jack: Accommodates balanced signals. Rane adheres to the international and U.S. standard for balanced pin con- figurations: Pin 1 is chassis ground (neutral), pin 2 is hot (positive), and pin 3 is signal return (negative). Choose between this and the ¼"...