Connecting To A Computer (Windows Xp Operating System) - Pro-Ject Audio Systems USB Box Instructions For Use Manual

Table of Contents

Connecting to a Computer (Windows XP

1. Connect the USB-input of the USB Box to a free USB-socket on your computer and

turn it on/make sure it is powered on.

Please note: Connection should be made to an USB-socket of your computer directly. Connecting to

USB-hubs or switches can cause problems.

2. The "new hardware found assistant" will detect the unit and announces it as a "USB loudspeaker".

3. open the System menu via "Start" (Windows key)

Settings

Control Panel

Sound and Audio Devices

5. In the Sounds and Audio panel select the Audio

tab. In the Replay section select your sound card

from the pull-down lists (usually preselected).

7. Confirm your selections by clicking the OK button and close the control panel windows.

operating system)

4. In the control panel open the

"Sound and audio" menu.

6. Select the USB Audio CODEC from the pull

down list in the Playback section. Make sure

your sound card is selected for Recording.

Table of Contents

Need help?