Olivetti Copia 9020 Instructions Manual page 62

MANUAL INSERT STAPLING
If required, copies can be stapled together using the Stapler/Sort and then inserted manually.
Type of sheet to staple
Size:
Number of sheets:
Procedure:
ADDING STAPLES
The NO STAPLES INDICATOR flashes (orange) when the staples are finished. To add
staples, proceed as follows.
1. Open the cover (the container
inside can hold two staple
cartridges).
chap1.p65
from A3 to B5
up to 20 sheets (80 g/m
1. Align the edges of the copies to be stapled.
2. Position the copies in the first top bin, as shown in the figure.
Make sure that the edges of the copies are in line with the front
edge of the bin.
The copies are stapled in the corner marked by a circle.
ATTENTION:
Never place your hand near the area to be stapled. Doing so,
could result in injury.
3. When the MANUAL STAPLER key lights up, press it for the
copies to be stapled.
2. Remove the stapler unit (press
and release).
25
2 )
3. Pull the unit out until it stops.
01/02/00, 10.42
25