Installation Instructions - Electrolux 42 Owner's Manual And Installation Instructions

3/4" FULL-WIDTH OVERLAY CUSTOM PANELS
This panel design provides a nearly trimless appearance.
Assemble the spacer panel onto the backer panel. Allow 1/2" clearance on all four sides of the
grille spacer panel. Allow 1/2" clearance on the top and hinge side, 15/16" on the bottom and 3-5/8"
on the handle side of the upper freezer door panel. Allow 15/16" on the top, 1/2" clearance on the
bottom and hinge side and 3-5/8" on the handle side of the lower freezer door panel. Secure the
panels with glue. Be sure to observe clearances on all sides.
Secure the appearance panel to the assembled backer/spacer panel. Use glue
and screws. Countersink screws into the backer panel.
Grille Panel
42" Models A
1/4" Backer Panel 39-15/16"
0.10" Spacer Panel 38-15/16"
3/4" Overlay Panel 40-3/16"
Upper Freezer Panel
42" Models A
1/4" Backer Panel 16-7/16"
0.10" Spacer Panel 12-5/16"
3/4" Overlay Panel 13-7/16"
Lower Freezer Panel
42" Models A
1/4" Backer Panel 16-7/16"
0.10" Spacer Panel 12-5/16"
3/4" Overlay Panel 13-7/16"

Installation Instructions

B
10-3/4"
9-3/4"
11"
B
17-13/16"
16-3/8"
17-5/8"
B
35-1/8"
33-11/16"
34-15/16"
Upper Freezer Panel
Spacer Assembly
1/2"
1/2"
Spacer
Panel
15/16"
B
A
5/16"
5/16"
B
A
3-5/8"
Finished
Backer Panel
26
A
3-1/8"
Required for Optimal
Handle Clearance
3-1/8" Min.
2-1/2"
3-1/8"
Lower Freezer Panel
Spacer Assembly
3-5/8"
1/2"
15/16"
Spacer
Panel
Finished
Backer Panel
1/2"
B
1/4"
Max.