Temperature Controls - Electrolux 42 Owner's Manual And Installation Instructions

About the temperature controls.
To change the temperature, press and release the
up or down arrow button. To change the
temperature, tap either the up arrow for warmer
temperatures or the down arrow for colder
temperatures until the desired temperature is
displayed. Refrigerator temperatures can be
adjusted between 34 °F and 46°F and the freezer
temperatures can be adjusted between -6 °F and +
6°F.
Performance Air Flow System
The Performance Air-Flow System is designed to
maximize temperature control in the refrigerator
and freezer compartments. This unique special
feature consists of the Air Tower along the back
The temperature controls are preset in the factory at 37°F for the
refrigerator compartment and 0°F for the freezer compartment. Allow
24 hours for the temperature to stabilize to the preset recommended
settings.
The actual temperature may vary slightly from the set temperature
based on usage and operating environment.
NOTE: The refrigerator is shipped with protective film covering the
temperature controls. If this film was not removed during installation,
remove it now.
Once the desired temperature has been set,
the temperature display will clear after 60 seconds.
To display the temperature, the Disp Temp button
may be tapped.
Several adjustments may be required. Each time you
adjust controls, allow 24 hours for the refrigerator to
reach the temperature you have set.
wall of the refrigerator and the freezer. Placing food
in front of the louvers on these components will not
affect performance.
ElectroluxUSA.com
5