Miele W 969 Operating Instructions Manual page 40

With the help of the following notes minor faults in the performance of the appli-
ance, some of which may result from incorrect operation, can be put right without
contacting the Service Department.
,
Repair work to electrical appliances should only be carried out by a suit-
ably qualified person in accordance with local and national safety regulations.
Unauthorised repairs could be dangerous.
– The programme does not start.
– The wash programme stops and a fault indicator light comes on.
– A fault indicator light comes on but the wash programme continues as normal.
– General problems or an unsatisfactory wash result.
Anti-crease/Fin-
ish
40
There is no power.
The washing ma-
Spin chine has not been
prepared for using
for the first time.
The programme se-
lector has not been
turned past the
Finish postion.
Check that
– the door is properly closed.
– the mains plug is plugged in.
– the fuse or circuit breaker has
not tripped.
Prepare the machine as de-
scribed in "Before using for the
first time".
Turn the programme selector to
the Finish postion and then to the
programme you want to run.