Miele W 969 Operating Instructions Manual page 31

The programmable functions enable
the user to introduce further features as
required. The programmable functions
remain stored in memory until they are
cancelled by the user.
A
The water level for rinsing is automat-
ically raised to the maximum level
where rinse results are particularly
important.
Effective for the rinses in programmes:
– COTTONS
– MINIMUM IRON
– QUICK WASH
– MIXED WASH - Poly/Cottons
B
The "Water plus" button offers four
options, increasing water level and/or
bringing in an extra rinse cycle.
Increase in the rinse water level in the
COTTONS, MINIMUM IRON, QUICK
WASH and MIXED WASH programmes,
where for example rinse results are par-
ticularly important.
Increase in the water level in main wash
and rinses for COTTONS, MINIMUM
IRON, DELICATES, QUICK WASH, and
MIXED WASH particularly for fabrics
that need special care, or where extra
attention must be taken in dissolving
detergent. This option is already set
when the machine is delivered from the
factory.
An extra rinse cycle is introduced to the
Cottons programme, e.g. when rinse re-
sults are particularly important.
Is Option 2 plus Option 3, where this
quality of rinse is required.
C
For the first 10 seconds of the main
wash cycle water flows in through
compartment i.
Compartment j may sometimes not
be able to hold the total amount of de-
tergent required when:
– the water is very hard (over
3.8 mmol/l, water hardness level IV)
and
– the washing is heavily soiled.
In this case compartment i can be
used to flush in the extra detergent for
the main wash.
i
31