Download Print this page

Care And Cleaning - Belson TS-10F-1 Use And Care Book

Professional multiple temperature marcel iron

Advertisement

2000/7-10-22.BP.GEN.IRN.UC 8/9/00 4:06 PM Page 2
OPERATING INSTRUCTIONS
PRODUCT MAY VARY SLIGHTLY FROM ILLUSTRATION
This appliance is for professional use only and may be plugged into any AC electrical
outlet (ordinary household current). Do not use any other electrical outlet.
IMPORTANT: During the first few minutes of initial use, you may notice smoke and a
slight odor. This is normal and will quickly disappear.
WARNING: This multiple temperature curling iron has been specially designed to curl
very coarse, thick, hard-to-curl hair. Due to this special application, the barrel of this
curling iron will be hotter on the EXTRA HOT setting than regular dual-heat curling irons.
Due to the extreme heat capabilities of this curling iron, extra care should be taken
when using.
• Keep unit away from contact with all skin areas. Do not touch iron barrel with
fingertips.
• For shorter hair, place a thin plastic comb between scalp and curling iron barrel
to avoid touching scalp.
• Test small section of hair to determine correct heat setting for the type of hair.
TO USE: For a complete styling, hair should be clean, dry and free from dirt, hair spray,
creams, etc. (Of course, this iron can always be used for quick touch-ups and rescues
any time.)
PRE-HEAT: Rest the iron on its safety stand on a smooth, flat surface, and plug in. Turn
on, set the heat control at the desired position, and allow iron to heat.
HOW TO GET PROFESSIONAL RESULTS WITH THIS CURLING IRON
This unique curling iron has been designed with multiple temperatures, providing very
high heat in the EXTRA HOT setting for curling very coarse, thick, hard-to-curl hair, and
very low heat in the LOW setting for curling extra fine, damaged or dry hair. It also
provides a full range of heat settings between LOW and EXTRA HOT, for all normal
textures and thicknesses of hair.
FOR FAST HEAT-UP, turn heat control dial to EXTRA HOT setting (it will take about five
minutes to heat up). Then, select a temperature according to the type of hair
(see below).
TEST A SMALL SECTION OF HAIR BEFORE USING, THEN ADJUST TEMPERATURE
ACCORDING TO YOUR NEEDS.
10 12
8
6
4
2
10
12
8
6
4
2
10 12
8
6
4
2
10 12
8
6
4
2
1. Marcel Handle
2. Tangle-free Swivel Cord
3. EXTRA HOT-to-LOW Temperature Control
4. On/Off Switch
5. Power Indicator Light
6. Clamp
7. Safety Stand
8. Barrel
USE ONLY LOW SETTING FOR PERMED
OR COLOR-TREATED HAIR
HOW TO USE
EXTRA HOT: This setting is very hot. Use it if hair is very
14
coarse, thick and hard-to-curl, but in good condition.
16
18
20
HOT: Use heat settings in this range for thick, wavy hair in
14
good condition.
16
18
20
MEDIUM: Use heat settings in this range for color-treated hair
14
in good condition.
16
18
20
LOW: Use this heat setting for very fine, fragile, damaged or
14
dry hair.
16
18
20
WARNING: Due to the extreme heat capabilities of this iron, the barrel will be very hot
in the EXTRA HOT setting, so extra care should be taken when using.

CARE AND CLEANING

This appliance requires little maintenance and contains no user serviceable parts. Do
not try to repair it yourself. Refer it to qualified service personnel if servicing is needed.
TO CLEAN: Unplug curling iron and allow to cool. Iron must be cleaned only when cold.
Use a soft, slightly damp cloth to wipe the handle. Do not allow water or any other liquid
to go into handle of the iron.
TO STORE: Unplug appliance and let it cool; store in its box or in a clean, dry place. Store
the cord loosely coiled. Never wrap the cord around unit; this could cause the cord to
wear prematurely and break. Do not put any stress on cord where it enters the handle,
as it could cause cord to fray and possibly break. Never hang unit up by the power cord.

Advertisement

loading

This manual is also suitable for:

Ts-06f-2Ts-06f-1Ts-04f-1Ts-03f-1Ts-05f-1