Download Print this page

Setting Up Your Network Usb Hub - Belkin F5L009 User Manual

Network usb hub
Hide thumbs Also See for F5L009:

Advertisement

Setting Up your Network USB Hub

The Hub works with Windows
1
(32- and 64-bit), and Mac OS
use the Hub, you must have a networking router connecting
your network.
2
1. Preparing for Setup
3
NOTE: If you are connected to a network router that uses
Dynamic Host Configuration Protocol (DHCP), which most
4
networks do, you do not need to set up your Hub.
1.1 Plug the AC adapter into the Hub.
5
1.2 Check the Power LED (green). It should be illuminated.
1.3 Plug the Ethernet cable into the Hub.
1.4 Plug the other side of the Ethernet cable into your
network router.
2. Installing the Software
IMPORTANT: If you do not install the software on your
computer, the Hub will not work.
2.1 Insert the setup CD into your CD-ROM drive.
You will see the Hub Setup CD icon.
Please open it and click "Setup" icon.
XP and Windows Vista
®
X (v10.3~v10.4). In order to
®
EN-2
EN-2
TM

Hide quick links:

Advertisement

loading