Belkin F5L009 User Manual page 18

Using the Network USB Hub Control Center
1
2
3
4
5
Select and click the Network USB Hub from the list. Then
click "Properties". Your web browser will launch and open
the web page built into the Network USB Hub.
From there, you can change the advanced network settings
and update the firmware for the Network USB Hub.
The password for the web page is blank or none by default.
Resetting the Network USB Hub
You may need to reset the Network USB Hub to either reset
the unit or to restore the factory default settings.
The reset button is located on the back of the unit. If you
press and hold the button for 1 second, the unit will reset.
If you press and hold the button for 5 seconds, the unit will
reset and restore itself to the original factory settings.
EN-16 EN-16