Call Timers; Packet Data; Monitor All Communication Events - Nokia N93 User Manual

Call timers

To monitor the approximate duration of your incoming
and outgoing calls, press
Call timers.
To set the display of the call duration while a call is active,
select Connect. >
duration > Yes or No.
Note: The actual time invoiced for calls by your
service provider may vary, depending on network
features, rounding off for billing, and so forth.
To clear call duration timers, select
For this you need the lock code; see "Security", "Phone and
SIM", p. 104.

Packet data

To check the amount of data sent and received during packet
data connections, press
Packet data. For example, you may be charged for your packet
data connections by the amount of data sent and received.

Monitor all communication events

Icons in Log:
Incoming
Outgoing
Missed communication events
62
, and select My own
Log > Options > Settings >
Options > Clear
, and select My own
To monitor all voice and video
calls, text messages, or data
connections logged by the
> Log >
device, press
own > Log, and press
select the general log. For
Show call
each communication event,
you can see the sender or
recipient name, phone number,
name of the service provider,
or access point. You can filter
the general log to view just
timers.
one type of event and create
new contact cards based on the log information.
Tip! To see the duration of a voice call on the main
display during an active call, select
Settings
Tip! To view a list of sent messages, press
> Log >
select
Subevents, such as a text message sent in more than one
part and packet data connections, are logged as one
communication event. Connections to your mailbox,
multimedia messaging center, or web pages are shown as
packet data connections.
To filter the log, select
, select My
to
> Show call duration > Yes.
Messaging > Sent.
Options > Filter and a filter.
Options >
, and