The Wash Programme Stops And A Fault Indicator Light Comes On - Miele W 2122 Operating Instructions Manual

Check drain
Check inlet
Check inlet
Check drain
Soak/Pre-wash
Rinses
A To switch off the fault indicator: switch the washing machine off with the
I-On/0-Off button and turn the programme selector to Finish .
The water outlet is
blocked.
The drain hose has
been fixed too high.
The water inlet is
blocked.
The filter in the water
inlet hose is dirty.
The water protection
system has reacted.
There is a fault.
Clean the fluff filter and the
drain pump as described in
"Problem solving guide -
Opening the drum door in
the event of a blocked drain
outlet and/or power failure".
The maximum drain height
is 1 m.
Open the stopcock.
Clean the filter.
Call the Service
Department.
Start the programme again.
If the fault indicators occur
again, contact the Service
Department.
A
35