Disengaging Speed Control; Resuming A Set Speed - Mazda B4000 Owner's Manual

Driver Controls
3. Press the SET + control and
release it.
4. Take your foot off the
accelerator pedal.
5. The indicator light
instrument cluster will turn on.
Note:
Vehicle speed may vary momentarily when driving up and down a
steep hill.
If the vehicle speed increases above the set speed on a downhill, you
may want to apply the brakes to reduce the speed.
If the vehicle speed decreases more than 16 km/h (10 mph) below
your set speed on an uphill, your speed control will disengage.
If the vehicle speed decreases to 40 km/h (25 mph) or less, your
speed control will disengage

Disengaging speed control

To disengage the speed control:
Depress the brake pedal or
Depress the clutch pedal (if equipped).
Disengaging the speed control will not erase previous set speed.
Note: When you use the clutch pedal to disengage the speed control,
the engine speed may briefly increase, this is normal.

Resuming a set speed

Press the RES (resume) control and
release it. This will automatically
return the vehicle to the previously
set speed. The RES control will not
work if the vehicle speed is not
faster than 48 km/h (30 mph).
50
on the