About Tab - M-Audio Fast Track USB User Manual

If you use Windows XP, install the software first following the directions below. Do NOT connect the Fast Track USB to your computer until
instructed to do so.
Windows XP
1. Place the Fast Track USB CD into your CD-ROM drive. Do NOT connect the Fast Track USB to your computer's USB port at this
time. A menu will automatically appear. If Autoplay is disabled, browse the CD content and double click the Fast Track USB folder.
Then double click the Fast Track USB Installer Icon.
2. The M-Audio Fast Track USB Installer screen will appear, asking you to confirm that you wish to install Fast Track USB. Click "Next"
to continue.
3. The installer will begin to copy the Fast Track USB files to your computer's hard drive.
4. In Windows XP, The Software Installation window may appear one or more times, warning you that the driver software has not
passed the Windows Logo testing. Click the "Continue Anyway" button.
5. Upon rebooting, the M-Audio Fast Track USB Control Panel icon will appear in the system tray. Connect the Fast Track USB to your
computer's USB port. Windows will display the Found New Hardware dialog and will open the New Hardware Wizard.
6. Choose the default selection, "Install the software automatically," and click "Next."
7. The New Hardware Wizard will write the remaining files to your system. You may once again see the warning that the driver
software has not passed the Windows Logo testing; click "Continue Anyway" and allow the installation to complete. Click "Finish."
8. After the installation is complete, you may double-click on the M-Audio Fast Track USB Control Panel icon to open the Fast Track
USB Control Panel. See the section "Fast Track USB Control Panel" for more information on the Control Panel's features and
functions.
Mac OS X
1. Plug the Fast Track USB in to your computers USB port.
2. Go to "System Preferences" in the Apple Menu. Select the "Sound" preference panel, and click the "Output" tab. Select "M-Audio
Fast Track USB" to choose the Fast Track USB as your default output device.
Fast Track USB's Control Panel
In Windows, you can open the Fast Track USB's control panel by double clicking on the M-Audio icon in the system tray. If you have more
than one M-Audio USB audio interface installer, right click the M-Audio icon in the system tray, and select "Open M-Audio Fast Track USB
control panel".

About Tab

This tab will show you the Fast Track USB's current control panel, driver and firmware versions, and allow you to connect to the M-Audio
website for updates. The Fast Track USB's control panel also provides helpful links to the M-Audio web site's knowledge base, manuals, support,
and registration pages.
Latency Tab
The Latency Page allows you to adjust the Fast Track USB's buffer size in order to achieve the optimal balance between system stability and
audio latency.
4 » English M-Audio Fast Track USB » User Guide