Output Page - M-Audio Firewire Audiophile User Manual

Output Page

The output page provides you with control over each of the FireWire Audiophile's
analog and digital outputs, as well as that of the aux bus and headphones bus.
Output Channels – Virtual faders control the individual channel output levels. The
output faders correspond to their respective analog and digital hardware outputs. When
the main/aux button is set to main, the Output Channel gets its signal from the bus
assignments selected on the mixer page. (See "Main/Aux Button," below.)
Balance Controls – The bal control allows you to adjust the balance of the associated
pair's stereo output.
Linking - Stereo pairs can be linked together with the link button above each channel
pair. Once the channel is linked (the button turns blue), grabbing and moving one fader
will move both faders in unison.
Main/Aux Button – When the main/aux button is in the main position (the button turns
blue), the associated analog or digital outputs carry their respective bus signals, as
determined by the routing selected on the mixer page:
outputs 1/2 out carries signals routed to bus 1/2
•
outputs 3/4 out carries signals routed to bus 3/4
•
outputs spdif out carries signals routed to bus spd
•