Customizing Camera Operation; Changing The Image Display Style After Shots - Canon PowerShot N User Manual

Customizing Camera Operation

Customize shooting functions on the [4] tab of the menu as follows.
For instructions on menu functions, see "MENU Menu"
Deactivating the AF Assist Beam
You can deactivate the lamp that normally lights up to help you focus when
you press the shutter ring halfway in low-light conditions.
Configure the setting.
z z
Touch [ H ], touch [ n ], choose
[AF-assist Beam] on the [4] tab, and
then choose [Off]
z z To restore the original setting, repeat this
process but choose [On].

Changing the Image Display Style After Shots

You can change how long images are displayed and what information is
(= 30).
displayed immediately after shooting.
Still Images
Changing the Image Display Period After Shots
(= 30).
Quick
2 sec., 4 sec.,
8 sec.
Hold
Off
1
Access the [Review image after
shooting] screen.
z z After touching [ H ], touch [ n ],
touch the [4] tab, and then touch
[Review image after shooting]
2
Configure the setting.
z z Choose [Display Time], and then choose
the desired option.
z z To restore the original setting, repeat this
process but choose [Quick].
Displays images only until you can shoot again.
Displays images for the specified time. Even while the shot is displayed,
you can take another shot by pressing the shutter ring halfway again.
Displays images until you press the shutter ring halfway.
No image display after shots.
Cover
Still Images
Preliminary Notes and
Legal Information
Contents: Basic
Operations
Basic Guide
Advanced Guide
1
Camera Basics
2
Creative Shot
Mode
(= 30).
3
Auto Mode/
Hybrid Auto Mode
4
Other Shooting
Modes
5
P Mode
6
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
9
Accessories
10
Appendix
Index
51