Setting Up A Security Profile - NETGEAR WN604 - Wireless-N 150 Access Point Reference Manual

– Shared Secret. This is shared between the Wireless Access Point and the RADIUS
Server while authenticating the supplicant (wireless client).
• Accounting Server. This configuration is required for accounting using a RADIUS
Server. The IP Address, Port Number, and Shared Secret are required for communication
with the Primary RADIUS Server. You can also configure a Secondary RADIUS Server to
use if the Primary RADIUS Server fails.
– IP Address. The IP address of the RADIUS Server.
– Port Number. Port number of the RADIUS Server. The default: 1813
– Shared Secret. This is shared between the Wireless Access Point and the RADIUS
Server while authenticating the supplicant (wireless client).
4. Click Apply to save your settings.

Setting up a Security Profile

The WN604 allows you to set up a single security profile for 802.11b/bg/ng, which is the default
profile..
Note: If you are using a RADIUS Server, configure the RADIUS settings first, as
described in the
.
Figure 3-8 Edit security profile settings
NETGEAR Wireless N150 Access Point WN604 Reference Manual
"Configuring the RADIUS Server Settings" on page
v1.0, March 2010
3-9.
3-11