NETGEAR WN604 - Wireless-N 150 Access Point Reference Manual page 108

NETGEAR Wireless N150 Access Point WN604 Reference Manual
NTP server, configure 2-8
O
operating modes, supported
point-to-multi-point bridge. 1-2
point-to-point bridge 1-2
wireless access point 1-2
P
package contents 1-5
packet fragmentation, support for 1-3
packet size 5-3
passphrase, use with WEP 3-4, 3-13
password
change 4-6
performance degradation
causes of 2-2
placement 2-2
point-to-multi-point bridge 5-7
configure 5-10
point-to-point bridge 5-6
configure 5-9
point-to-point bridge mode
wireless point-to-multi-point bridge 5-7
power adapter 1-8
power consumption 2-2
preamble type 5-4
preshared key passphrase
WPA-PSK 3-19
primary DNS server, configure 2-13
product registration 1-ii
profile name
bridge mode wireless station 5-6
wireless point-to-multi-point bridge 5-7
Q
QoS queues 5-6
QoS settings 2-17
QoS settings, advanced
Index-4
AP EDCA parameters 5-5
station EDCA parameters 5-5
R
RADIUS and certificate authentication, support 1-2
RADIUS server, configure 3-9
accounting server 3-11
authentication server 3-10
RADIUS server, configure first 3-2, 3-11
range 1-1
guidelines 2-2
rear panel 1-8
reboot 4-5
reset button, using 6-4
rebooting
losing previous state 4-13
reception 2-2
reduced inter frame spacing, support for 1-3
registering 1-ii
Registrar, WPS 3-5
request to send threshold 5-3
reset button 4-5
reset to factory defaults 4-5
retransmission 1-3
revision history 1-xiii
RIFS
wireless settings 5-4
roaming
multiple wireless access points 4-12
roaming on same subnet, support for 1-3
RTS 5-3
RTS/CTS handshake, support for 1-3
S
Scheduled Wireless 5-1
security profile definition
authentication settings 3-3
broadcast wireless network name (SSID) 3-3
data encryption 3-4
wireless client security separation 3-4
v1.0, March 2010