Cleaning And Maintenance; Cleaning The Main Components - Kogan KACOFXXAUTB User Manual

ME-711
Fully-automatic Coffee Machine
00:25
D.
Drip Tray Missing
E. 00:25
Dregdrawer Missing
00:25
F.
DRIP TRAY MISSING
If this message is indicated on the LCD, install the
drip tray [1] or make sure it is well positioned
DREG DRAWER MISSING
Dreg drawer [16] is not in the right position, please
check if the dreg drawer is installed, or if correctly
installed.
BREWING UNIT MISSING
Brewing unit [14] is not in the position, please check if
the brewing unit is installed, or if correctly installed.
00:25
G.
CLOSE THE DOOR
Brewing door[13]is not in the right place, Be sure to put
the brewing door in the right place.
00:25
H.
Ventilate
OK
00:25
I.
ecalcify
D
ress ok or esc
P
ESC
OK

3.7 Cleaning and maintenance

Keeping the machine clear is significant for making high quality coffee and extension of service
life of the machine.
Shut off the power before cleaning and wait for the machine to be cool.
Never put the machine into water or other liquids.In order to avoid causing short circuit.
Never put the parts of the machine into a dishwasher.
Never put components into microwave oven or over dries.

3.7.1 Cleaning the main components

In order to keep the coffee spout [5] and the brewing unit [14] clean, it is recommended to empty
the dreg drawer [16] and drip tray [1] once a day.Clean the water tank [8] , drip tray [1] , drip tray
cover and dreg plate [15] regularly.
When the red buoyage in drip tray is higer than drip tray surface, please empty the drip tray as
soon as possible.
USER MANUAL
19/20
VENTILATE
The machine in a vacuum state, the need for the
machine to carry out drainage action (please
refer to earlier drainage section).
DECALCIFY
When LCD shows " DECALCIFY " , that
means the machine needs to be descaled.
Press " ESC " to cancel decalcify, ( The
warning will be repeated next time )
Press " OK " to continue.