Table of Contents
Advertisement
Operating the Hob
When a cooking zone is switched on, it may hum briefly. This is a char-
3
acteristic of all glass ceramic cooking zones and does not impair either
the function or the life of the appliance.
TOUCH CONTROL Sensor Field
To operate the TOUCH CONTROL sensor field place your finger from
above flat onto the required field until the appropriate displays come
on or go out or the required function is carried out.
Switching On the Appliance
The entire appliance is switched on using the "On/Off" n sensor field.
Touch the "On/Off" sensor field for approx. 2 seconds.
The digital displays will show j and the decimal point will flash.
Once the "On/Off" sensor field has been operated to switch on the ap-
3
pliance, one of the cooking zones must be selected within approx.
10 seconds using the cooking zone selection buttons. Otherwise the ap-
pliance switches off again for safety reasons.
Operating Instructions
49
Advertisement
Table of Contents
