Before Using For The First Time; Initial Cleaning; Operating The Hob; Touch Control Sensor Field - AEG 91900K Installation And Operating Instructions Manual

Before Using for the First Time

Initial Cleaning

Wipe the ceramic glass surface with a damp cloth.
1
Important: Do not use any caustic, abrasive cleaners! The surface could
be damaged.

Operating the Hob

3
When a cooking zone is switched on, it may hum briefly. This is a char-
acteristic of all ceramic glass cooking zones and does not impair either
the function or the life of the appliance.

Touch Control Sensor Field

To operate the Touch Control sensor field place your finger from above
flat onto the required field until the appropriate displays come on or go
out or the required function is carried out.

Switching On the Appliance

The entire appliance is switched on using the "On/Off" I sensor field.
Touch the "On/Off" sensor field for approx. 2 seconds.
The digital displays will show _ and the decimal point will flash.
3
Once the "On/Off" sensor field has been operated to switch on the ap-
pliance, one of the cooking zones must be selected within approx.
10 seconds using the cooking zone selection buttons. Otherwise the ap-
pliance switches off again for safety reasons.
47