2-Thread Flatlock - Narrow - Baby Lock imagine BLE1AT-2 Instruction Manual

2-Thread Flatlock - Narrow

Sew a 2-thread flatlock seam then pull the two fabric layers apart
until the seam lies flat (fig. A).
Because the threads show on the outside as well as the inside of
the garment or project, the flatlock seam is often considered a dec-
orative application (fig. B).
For 2-thread flatlock - narrow
1. Lock the machine.
2. Place needle thread on right needle spool pin.
3. Thread needle thread through the upper looper thread guide on
top of the machine, then go down the thread path in the front of
the machine. Go left with the needle thread at the hook on front
of the machine. Then take the needle thread through the normal
needle thread paths. (See illustration below).
4. Engage the subsidiary looper following step 3 on page 25.
5. Thread the lower looper as shown in the illustration below.
If you want the "overlock stitching" to show on the right side of the
fabric, place wrong sides together and sew. (Fig. C)
NEEDLES
right
LENGTH WIDTH
3-3.5
Loop
Wrong Side
Right
Side
Looper
Needle
Thread
Thread
Right
Side
Wrong Side
STITCH
SELECTOR
3.5
B
2
T
H
R
E
A
A
D
O
V
B
E
R
L
O
C
C
K
27