3-Thread Wave Stitch - Baby Lock imagine wave BLE3ATW Instruction And Reference Manual

W

3-thread Wave Stitch

A
V
1. Turn the Wave Selector dial from "O" to "W".
2. Cut the threads from the thread cones and remove from the thread paths.
E
3. Lock the machine for threading the loopers. (see page 10)
4. Place the right needle thread cone on the far left spool pin.
5. Slip the right needle thread into the telescopic thread guide directly above the thread. Follow the left
needle threading path down to the right needle.
S
6. Thread the right needle using the needle threader set on "R". (see page 13)
7. Place the upper looper thread cone on the 2nd from left spool pin.
8. Slip the upper looper thread into the telescopic thread guide directly above the thread. Follow the top
T
threading path for the right needle thread, down the front threading path, to the left of the chrome thread
guide, and directly to the "U" jet air threading port for the upper looper. Set the Looper Threader
I
Selector on "U". Thread the upper looper. (see page 11)
9. Place the right needle thread and upper looper thread under the presser foot and to the back.
T
10.Place the lower looper thread cone on the 3rd from left spool pin.
11. Slip the lower looper thread into the telescopic thread guide directly above the thread, then slip the
C
thread into the lower looper telescopic thread guide to avoid the thread getting tangled while sewing.
Take the thread through the standard lower looper threading path to the "L" jet air threading port for the
H
lower looper. Set the Looper Threader Selector on "L". Thread the lower looper. (see page 10)
12.Set Stitch Selector on "B" for Wave Stitch.
13.Set Stitch Length and Stitch Width following the illustration below.
NEEDLES
34
LENGTH
1.0-2.5
right
STITCH
WIDTH
SELECTOR
5.0
B
WAVE
SELECTOR
W
W
A
B
C
D