Integrated Peripherals - Gigabyte GA-H67A-USB3-B3 User Manual

2-6

Integrated Peripherals

CMOS Setup Utility-Copyright (C) 1984-2010 Award Software
eXtreme Hard Drive (XHD)
PCH SATA Control Mode
SATA Port0-3 Native Mode
USB Controllers
USB Legacy Function
USB Storage Function
Azalia Codec
Onboard H/W LAN
 SMART LAN
Onboard LAN Boot ROM
Onboard Serial Port 1
higf: Move Enter: Select
F5: Previous Values
eXtreme Hard Drive (Intel H67 Chipset)
Enables or disables the X.H.D function for the SATA controllers integrated in the Intel H67 Chipset.
When set to Enabled, the PCH SATA Control Mode item below will be set to RAID(XHD) automatically.
For details on using the GIGABYTE X.H.D utility, refer to Chaper 4, "eXtreme Hard Drive (X.H.D)." (Default:
Disabled)
PCH SATA Control Mode (Intel H67 Chipset)
Enables or disables RAID for the SATA controllers integrated in the Intel H67 Chipset or configures the
SATA controllers to AHCI mode.
IDE Disables RAID for the SATA controllers and configures the SATA controllers to IDE
mode. (Default)
RAID(XHD) Enables RAID for the SATA controllers.
AHCI Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface
(AHCI) is an interface specification that allows the storage driver to enable advanced
Serial ATA features such as Native Command Queuing and hot plug.
SATA Port0-3 Native Mode (Intel H67 Chipset)
Specifies the operating mode of the integrated SATA controllers.
Disabled Allows the SATA controllers to operate in Legacy IDE mode.
In Legacy mode the SATA controllers use dedicated IRQs that cannot be shared with
other device. Set this option to Disabled if you wish to install operating systems that
do not support Native mode.
Enabled Allows the SATA controllers to operate in Native IDE mode. Enable Native IDE mode if you
wish to install operating systems that support Native mode. (Default)
USB Controllers
Enables or disables the integrated USB controller. (Default: Enabled)
Disabled will turn off all of the USB functionalities below.
USB Legacy Function
Allows USB keyboard to be used in MS-DOS. (Default: Enabled)
Integrated Peripherals
[Disabled]
[IDE]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Auto]
[Enabled]
[Press Enter]
[Disabled]
[3F8/IRQ4]
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
- 45 -
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults
BIOS Setup