Gigabyte GA-H67A-USB3-B3 User Manual page 39

tFAW
Options are: Auto (default), 1~63.
Command Rate(CMD)
Options are: Auto (default), 1~3.
>>>>> Channel A/B Misc Timing Control
IO Latency
Options are: Auto (default), 1~31.
Round Trip Latency
Options are: Auto (default), 1~255.
 Advanced Voltage Settings
CMOS Setup Utility-Copyright (C) 1984-2010 Award Software
****** Mother Board Voltage Control ******
Voltage Types
-----------------------------------------------------------------------------
>>> CPU
Load-Line Calibration
CPU Vcore
x Dynamic Vcore(DVID)
QPI/Vtt Voltage
Graphics Core
x Graphics DVID
>>> MCH/ICH
PCH Core
CPU PLL
DRAM Voltage
DRAM Termination
Ch-A Data VRef.
Ch-B Data VRef.
Ch-A Address VRef.
Ch-B Address VRef.
higf: Move Enter: Select
F5: Previous Values
>>> CPU
Load-Line Calibration
Enables or disables Load-Line Calibration. This item allows you to adjust Vdroop at different levels. En-
abling Load-Line Calibration may keep the CPU voltage more constant under light and heavy CPU load.
(Default: Auto)
Standard Disables Load-Line Calibration and sets VDroop following Intel specifications.
Level 1 Enables Load-Line Calibration and slightly adjusts VDroop.
Level 2 Enables Load-Line Calibration and moderately adjusts VDroop.
Note: Enabling Load-Line Calibration may result in damage to your CPU or reduce the useful life of the CPU.
CPU Vcore
The default is Auto.
Dynamic Vcore(DVID)
This option is configurable only when CPU Vcore is set to Normal. The default is Auto.
QPI/Vtt Voltage
The default is Auto.
Graphics Core
The default is Auto.
Graphics DVID
This option is configurable only when Graphics Core is set to Normal. The default is Auto.
Advanced Voltage Settings
Normal Current
[Auto]
1.180V [Auto]
+0.000V Auto
1.050V [Auto]
1.015V [Auto]
+0.000V Auto
1.050V [Auto]
1.800V [Auto]
1.500V [Auto]
0.750V [Auto]
0.750V [Auto]
0.750V [Auto]
0.750V [Auto]
0.750V [Auto]
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
- 39 -
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults
BIOS Setup