Installation Proud Of The Work Surface - AEG 66201 KF-N Installation And Operating Instructions Manual

Appliance dimensions
Width
Depth
Height

Installation proud of the work surface

• Clean the worktop in the area of the cut-out section.
• Stick the one-sided self-adhesive sealing tape supplied all the way
round the lower edge of the cooking surface along the outer edge of
the glass ceramic panel. Do not stretch it. The cut ends should lie in
the middle of one side. When you have cut it to length (add a few
mm), press the two ends flush up against one another.
30
590 mm
520mm
47mm