Cakewalk Sonar - ESI MaXiO 032 System Manual

MaXiO System Manual

6.3 Cakewalk SONAR

There are few steps to configure SONAR, which supports either WDM or ASIO drivers. After
launching SONAR, go to Options > Audio.
If you prefer the shown in the following picture:
WDM/KS mode, change the settings as
Note that the input and output drivers have to match each other. Restart SONAR after the settings
have changed.
If you prefer the ASIO mode (which is supported in SONAR 2.2 and newer), first, change the
Driver Mode to ASIO on the Advanced tab of as shown below. Then restart SONAR. Note that we
recommend using ASIO instead of WDM/KS as the performance will be better.
41