Types Of Caps - Baby Lock Embroidery Professional BMP8 Instruction And Reference Manual

APPENDIX —————————————————————————————————————————————————————

Types of caps

With the machine, we recommend that the following
types of caps be embroidered.
■ Standard(Pro Style)
Face: Pro style
Otto Interna-
tional, Inc. cap
OTTO27-007
model number
(Example)
Mesh backing
on the back of Constructed
front panels firm front
(soft or hard)
Ease of framing Easy
(hooping) (Recommended)
Backing 1 to 2 ply
■ Low Profile (Low fitting)
Face: Low fitting
Otto Interna-
tional, Inc. cap
OTTO23-225
model number
(Example)
Mesh backing
on the back of Constructed
front panels firm front
(soft or hard)
Very difficult
Ease of framing (because the
(hooping) cap material
very hard.)
Backing 1 to 2 ply
172
■ Golf Style
6 sections
tional, Inc. cap
Mesh backing on
the back of front
Ease of framing
Unconstructed
soft crown
Fairly easy
2 to 3 ply
6 sections
OTTO18-203
Unconstructed
soft crown
Fairly easy
2 to 3 ply
Face: Not divided
Otto Interna-
OTTO23-225
model number
(Example)
Constructed
panels firm front
(soft or hard)
Fairly easy
(hooping)
Backing 1 to 2 ply
Memo
● Check if this area 1 is covered with mesh.
Note
● There is no centerline that can be used as a
guide for placing the cap in the cap frame.
Before framing the cap, use a charcoal pen
to mark the centerline.
5 sections