Additional Digitizing Information - Baby Lock Embroidery Professional BMP8 Instruction And Reference Manual

Hide thumbs Also See for Embroidery Professional BMP8:
Table of Contents

Advertisement

APPENDIX
—————————————————————————————————————————————————————
6
Align the holes on the embroidery frame holder
with the pins in the frame-mounting plate of the
carriage.
1 Pins in the frame-mounting plate
2 Holes on the embroidery frame holder
7
Secure the embroidery frame holder with the two
thumb screws.
1 Use the thumb screws included with the machine
(thumb screws removed in step
CAUTION
Using the disc-shaped screwdriver
included, firmly tighten the thumb
screws.
188
Additional digitizing
information
When creating a pattern for embroidering with a cap
frame, pay attention to following points in order to
avoid registration problems (misalignment of gaps in
the pattern).
1
2
1
on page 173).
Sew underlay stitches.
Start the embroidery pattern from the center,
and sew toward the ends.
With the machine, the order in which patterns
are selected when they are combined is the
order in which they will be sewn. For the
following example, select the patterns in the
order "E"
"A"
"B"
combined pattern "BEAR".
Incorrect
sewing
order
Correct
sewing
order
Note
● Do NOT sew from one end to the other,
otherwise wrinkling or shrinking may occur.
"R" to make the

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents