Baby Lock Embroidery Professional BMP8 Instruction And Reference Manual page 228

Patterns stored in the
machine's memory cannot be
recalled.
The machine's memory may be
damaged. Consult your nearest
authorized retailer.
The pattern is larger than the
embroidering area of the
installed embroidery frame.
Use an embroidery frame with
an embroidering area that is
larger than the pattern.
The USB media is write-pro-
tected.
Touch , and cancel the
write protection.
A pattern on an embroidery
card not compatible with this
machine was being recalled.
Some embroidery cards with
copyrighted patterns cannot be
used.
The machine couldn't save the
data.
Try to use a different media.
Thread color that was specified
is incorrect.
The thread color number that
was entered is not in the custom
thread table setting. Check the
number, and then try entering
the number again.
The USB media was attempted
to change while it is being
read.
Please try again without discon-
necting.
Embroidery data with an
incompatible version is being
used.
Embroidery data that is not
complete or has an unknown
version cannot be used.
The machine was stopped
while the needle bar case was
moving.
Touch to automatically
reset the needle bar case.
The USB media is write-pro-
tected.
Cancel the write protection.
was touched while no
embroidery card is inserted.
Insert an embroidery card.
(Refer to page 113.)
The pattern has too many
stitches and cannot be used.
Data with stitches that exceed
specifications (500,000 stitches)
cannot be displayed. Use data
design software to reduce the
number of stitches.
Troubleshooting
7
211