Attaching The Embroidery Foot - Baby Lock ellure BLR Instruction And Reference Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
EMBROIDERY

Attaching the Embroidery Foot

This section describes how to attach the embroidery foot.
Attaching the embroidery foot
Attach the embroidery foot when embroidering.
Have the included embroidery foot "Q" and a
screwdriver ready.
2
a Embroidery foot bar
b Caught by the presser foot holder screw
CAUTION
● Always use the embroidery foot "Q" when
embroidering. If the wrong presser foot is
used, the needle may hit the presser foot
and break or bend.
a Press (Needle position button) once or
twice to raise the needle.
a Needle position button
The needle goes up.
b Turn off the sewing machine.
130
1
1
CAUTION
● Before replacing the presser foot, be sure
to turn off the sewing machine, otherwise
injuries may occur if
button) is accidentally pressed and the
machine starts sewing.
c
Raise the presser foot lever.
a Presser foot lever
The presser foot is raised.
• At the time of purchase, the presser foot lever
is up.
d Press and hold the black button on the back of
the presser foot holder to detach the presser
foot.
a
b
a Black button
b Presser foot holder
/ (Start/stop
a