Starting To Sew - Baby Lock ellure BLR Instruction And Reference Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Starting to sew

Once you are ready to start sewing, you can start the
sewing machine. The sewing speed can be adjusted
using either the sewing speed controller or the foot
controller.
Note
When the foot controller is plugged in,
/
used to start or stop sewing.
■ Using the operation button
Sewing can be started and stopped using the
operation button
a Slide the sewing speed controller to the left or
right to select the desired sewing speed.
Slide the sewing speed controller to the left to
sew at a slower speed, or slide the speed
controller to the right to sew at a faster speed.
a Sewing speed controller
b Press
a Start/stop button
The machine starts sewing.
(Start/stop button) can not be
/ (Start/stop button).
/ (Start/stop button) once.
1
• If you continue to hold the
stop button) pressed immediately after the
sewing starts, the machine will sew at a slow
speed.
When the end of the stitching is reached, press
c
The machine stops sewing with the needle
down (in the fabric).
d When you have finished sewing, press
(Needle position button).
The needle is raised.
e Cut the threads.
1 • For details, refer to "Cutting the thread" (page
54).
This machine will automatically stop when
the bobbin becomes almost empty. When
the machine stops, replace the bobbin
thread, and then press
button) to begin sewing again.
■ Using the foot controller
Sewing can be started and stopped using the foot
controller.
a Turn off the sewing machine.
When connecting the foot controller, be sure to
turn off the sewing machine in order to prevent
the machine from accidentally being started.
/ (Start/stop button) once.
Note
/ (Start/
2
/ (Start/stop
Sewing 51