New Functions In Version 2.0; 10’S Hold Function Has Been Added; Shortcut When Selecting Banks - Korg Trinity Manual

New functions in version 2.0

Several new functions have been added to version 2.0 for Trinity
series music workstations. The following pages explain the
added features and functions.
1. Audition the highlighted sound in the Select By Category dialog
box
When choosing a program or combination in the Select By Category
page menu command of Program Play mode, Combination Play mode
or Sequencer mode, you can now audition sounds as you highlight them.
Lock the screen with the safety pin to freely select from the sounds within
the chosen category and play the keyboard to hear your selection.
Scrolling is no longer necessary since the category menus display all 16
choices at once.
2. 10's Hold function has been added
Enable 10's Hold (check command) has been added
to the page menu of Program Play mode and
Combination Play mode.
If Enable 10's Hold is checked, the numeric keys and the [ ]/[ ] buttons
will function as described below when selecting programs or
combinations.
Pressing a numeric key will change the last digit. (The next two digits
will not change.) For example, while on program 090, press "6" to move
to program 096.
Pressing the [ ]/[ ] buttons will change the first two digits. (The last
digit will not change.) For example, press [ ] to move from program
000 to 010 or to move from combination 090 to combination 100.
3.

Shortcut when selecting banks

In Program Play mode and Combination Play mode, the program or
combination bank can be specified.
By holding down the [BANK] button and pressing the [P1] page button
you can select bank A. By holding down the [BANK] button and pressing
the [P2] page button you can select bank B. In this same way, you can
select any bank A—S by holding down the [BANK] button and pressing
a page button [P1]—[P5]. However, the bank will change only once while
the [BANK] button is pressed. If you have selected the wrong bank,
release the [BANK] button and repeat the process to select the correct
bank.
New functions in version 2.0
1