Honda Accord Owner's Manual page 211

Main Menu
Compass
Compass Zone Selection
In most areas, there is a variation
between magnetic north and true
north. Zone selection is required so
the compass can compensate for this
variation. To check and select the
zone, do this:
Turn the ignition switch to the ON
1.
(II) position.
2. Press and hold the MENU button
for about 5 seconds until you hear
a beep. The display shows you the
compass setting menu items.
3. Turn the selector knob to select
''ZONE.'' Press the selector knob
to enter your selection. The
display shows you the currently
selected zone number.
208
Table Of Contents
4. Find the zone for your area on the
map (see page
zone is not shown, turn the
selector knob to cycle the zone
lists up or down.
If necessary, press the RETURN
button to return to the previous
display. Pressing the MENU
button will cancel the compass
setting mode.
2008 Accord Coupe
5.
209 ). If the correct
ZONE NUMBER
Once the correct zone is displayed,
press the selector knob. The
display then returns to normal.